After vacuum coating process, the ceramic tile will be more gloss, and the wear resistance index of the ceramic tile will be improve greatly. Ceramic tiles/ ceramic mosic vacuum coating machine can coat imitation gold, also can get rose gold, coffee, copper, blue, magic rainbow color, black and so on.
Ceramic tiles/ ceramic mosic vacuum coating machine mainly used in coating ceramic tile, ceramic plate, tile etc.This series vacuum coating machine mainly install cathod arc evaporation power supply, bias power supply, ion source for ion bombardment as well. Machine features: match with high efficient vacuum system, large capacity, high productivity and low production cost. It can coat imitation gold, also can get rose gold, coffee, copper, blue, magic rainbow color, black and so on.
It can get all sorts of color decorative pattern design by adpot decal paper and water soluble paint shade technology. After vacuum coating process, the ceramic tile will be more gloss, and the wear resistance index of the ceramic tile will be improve greatly.
Tag: pvd coating machine vacuum metalizing equipment DLC coating machine
Mode
HCCA-1000
HCCA-1150
HCCA-1200
HCCA-1600
mension
1000×1200
1150×1200
1200×1300
1600×1800
1600×2200
Coating
Gold TiN, black TiC, rainbow TiO, wear resistant coating, supper hard coating, DLC coating, metal decorative coating and so on
Power supply system
DC power supply, MF power supply, arc power supply,filament power supply,activation of the power supply, pulsed bias power supply
Target type
Multi-arc target, MF twin targets or plane target as options
Vacuum chamber structure
Vertical front door(Double water jacket type cooling or sink type cooling),the rear air exhaust system
Vacuum system
Mechanical pump+Roots pump+diffusion pump/Turbo molecular pump+holding pump
Heating system
Normal temperature to 350 centi-degree adjustable and controllable (PID control), radiation heating by stainless steel heating pipe
Inflation system
Mass flow control(1-4 road)
Ultimate vacuum
6×10-4pa（no-load,cleaning room）
Vacuum time
Pumping time less than 13 minutes ,from atmospheric pressure to 310 -3 Pa mo-load
Pressure maintaining rate
1h≤0.6pa
Workpiece rotation
Up rotate or bottom rotate + common rotation frequency conversion stepless controlable and adjustable, 0 to 20 RPM
Control mode
Manual+semi automatic/touch screen+PLC
Remark
Vacuum chamber size can be customized according to the requirements of customers products and special process
- Mainly used for coating tile, ceramic plate, widely used in ceramic floor tile, building ceramic tile, artistic ceramic tile,etc. Applicable to deposit (TiN, TiC,TiCr, etc) film on floor tile, wall brick, tile, waist line decoration, spelling a flower, roll tiles, mosaics and so on.
-
