Glass vacuum coating machine Glass coating is a chemical polymer material. Because of its high-density chemical properties, it is used in the field of automotive beauty. At the same time, glass coating has high gloss, anti-oxidation, acid and alkali resistance, and UV resistance. Features: After coating the paint surface, the gloss of the paint surface is very good, and the paint surface is isolated from the outside world, which plays a good protective role.

        The main component of glass coating of glass vacuum coating machine is polysiloxane. The English name (polysiloxane, silicone) is a kind of polymer with repeated Si-O bonds as the main chain and silicon atoms directly connected to organic groups. It will form Sio2 commonly known as glass (but not real glass), so it is also called vitreous coating.
       1. To prevent oxidation and aging of the paint surface, the real glass coating does not contain petroleum components, and after construction, a hard inorganic (glass crystal) film will be formed on the surface of the car paint, which is closely combined with the car paint and will never fall off. The car paint is completely isolated from the air, which can effectively prevent the car paint from oxidation and discoloration caused by external factors.
       2. Corrosion resistance. The hard non-organic (glass crystal) film layer will not oxidize itself, but also prevent the corrosion of the car paint by external acid rain, flying insects, bird droppings, etc. The dense glass crystal film has super corrosion resistance, and the coating can effectively prevent acid rain. It can prevent the damage of car paint caused by corrosive substances and prevent the fading of car paint.
       3. High temperature resistance. The glass crystal itself has the characteristics of high temperature resistance, which can effectively reflect the sunlight and the external heat radiation effectively, and prevent the damage to the car paint caused by high temperature.
       4. Anti-scratch. The hard non-organic (glass crystal) film layer can increase the hardness of the car body surface to 7H, which is much higher than the hardness of car wax or glaze 2H-4H, which can better protect the car paint from sand and gravel damage.
       5. Easy to clean. The ionized coating has super self-cleaning and water repellency, and is not easy to adhere to dust and dirt. When cleaning, only water can be used to achieve the cleaning effect, so that the vehicle maintains high cleanliness and gloss.
       6. Super durable and strong toughness and extensibility, usually protect the surface brightness of car paint, form a mirror effect for more than 2 years, far more than waxing and sealing glaze.
       7. Super water repellency. The surface of the hard non-organic (glass crystal) film layer has super water repellency after fluorine treatment, so that the water falls on the car body and shrinks into water droplets and slips down, effectively preventing the formation of scale.
       8. The ultra-environmentally friendly use of water-compatible environmental protection materials will not oxidize itself, and will not cause secondary pollution to the car paint, while the traditional waxing and sealing glaze project is likely to cause secondary pollution to the car paint.
       The glass vacuum coating machine is widely used. The daily common architectural glass, electronic product glass, etc. are also coated with a layer of film by the coating machine, which not only changes the appearance of the surface, but also changes its performance and use. With the rapid development of society , With the development of science and technology, people's quality of life is gradually rising, so there must be a higher pursuit of everything around them.