HCAR series

Automotive AR + AF plating

Vacuum application solution supplier
Home > Product > Vehicle display screen coating machine
Vehicle display screen coating machine

Compared with the ordinary plane target device in the industry, the service cycle and utilization efficiency of the target material of the rotating cathode device are significantly improved; the customized structure of the base plate workpiece frame can provide the maximum utilization space for the customer's product placement; the fully automatic lifting and lifting frame device can greatly reduce the opening and closing time of the machine and greatly improve the production efficiency and process stability; the patent separation The sub source has the characteristics of wide energy balance, high isolation rate, super stable working efficiency and low energy consumption.

It can use time to precisely control the film thickness, meet the design process requirements, save crystal control and optical control links, and save a large number of film thickness instrument consumables for customers; it can produce high refractive index nitriding film, improve the film hardness performance; it can be used for various purposes at low temperature; it can automatically adjust the gas flow patent device, maintain a stable target voltage, and ensure the film quality; optional "correction plate" External adjustment mechanism ".

The sputtering deposition system is equipped with a plurality of cylindrical targets on the side wall to improve the deposition rate and multilayer coating. The system is equipped with a DC pulse or RF power circular cathode. The vertically mounted substrate and cylindrical cathode can minimize the particle pollution in the coating process.

AR ilm (substrate glass transmittance > 91.5%):
■  In 420-680nm band, the average transmittance of one side is more than 95%, and the reflectivity is less than 0.5 (average);
■  The average transmittance on both sides is more than 98%, and the reflectivity is less than 0.5 (average);

AS/AF membrane test standard:
■   The range of initial contact angle is 115 ± 5 °;
■   Friction resistance test standard of steel wool: use 0000 × 10 mm steel wool, area is 10 * 10 mm, travel 40 times / min, load 1kg, after 5000 times of back and forth friction, contact angle is greater than 100 °;
■   Test standard of eraser: 6mm diameter eraser, 25 strokes / min, 1kg load, 2500 round-trip friction, contact angle greater than 100 °;
Note: the test sample glass shall be the touch screen cover plate special glass after precision polishing, with smooth surface.

Product Advantage.

HCAR series vehicle display screen coating machine includes the following key capabilities:
  • Compact

    Small footprint, easy to integrate into the factory

  • Patented

    Huicheng independent research and development ion source

  • Accurate

    Accurate monitoring of film thickness

  • Low temperature

    Film formation at low temperature less than 70 ℃

  • Automation

    Automatic regulation of gas flow

  • Simple

    Easy to operate and maintain

Mode HCAR-2100
Coating area Φ2100x H1200mm
Structure Vertical single door, All-In- One Box layout
Wavelength 380nm~780nm
Rotational speed 0~25RPM(variable)
Coating chamber pumping speed 4.0×10-3Pa≤30min
Ultimate vacuum 5.0×10-4Pa
Sputtering target Nb,Si,Cr,Al,In ...
Jig Unit Center Rotation Revolution Jig at the bottom
Vacuum Unit Low Vacuum Pump + High Vacuum Pump + Cryogenic Pump
Vacuum Controller Vacuum Controller, Penning Gauge, Pirani Gauge
Coating Unit DC + MF Magnetron Sputtering Source + Plasma Source
Charge Unit MFC + speedflo pressure controller
Thickness Controller Crystal Controller
Controller Industrial PC + TP
Application AR, Hard AR Coating, Hard Coating, Decorative Coating, HR Coating, etc.
Remark: Customization
Mode HCEB-2700
Size(mm) Φ2700 x H1850
Structure Vertical Chamber with single Door, SUS304 Stainless Steel
Wavelength 380nm~780nm
Rotational speed 0~30RPM (variable)
Pumping speed Atmospheric pressure to 2.0×10-3Pa less than 30min
Ultimate vacuum 8.0×10-5Pa
Coating material Tio2,Ti3o5,H4,Zro2,Zns,Al2o3,Mgf2,Sio2,Au,Ag,Cu,Al,Ti,In,Sn...
Jig Unit Single or split DOME
Heater Micro-sheath, Up to 250℃
Vacuum Unit Low Vacuum Pump + High Vacuum Pump + Polycold
Vacuum Controller Vacuum Controller, Penning Gauge, Pirani Gauge
Coating Unit E-type E-Beam Source(270°Deflection) with Hole-shape, Waist-shape or Annular Crucibles &. 10KW Power Supply.Thermal Source Available. RF / Kauffman-type I-beam / End-hall-type Source.
Charge Unit MFC or APC Automatic pressure controller
Thickness Controller Crystal Control or Optical Control
Controller Industrial PC + PLC + TP
Application AR, UV/IR Cut Filter, AF, Hard Coating, Decorative Coating, ITO Coating, Band Pass Filter, HR Coating, etc.
Remark: Customization
Mode HCAF-1619
Size Φ1600x H1900mm
Structure Vertical single door, All-In- One Box layout
Pumping speed Atmospheric pressure to 2.0×10-3Pa≤30min
Ultimate vacuum 8.0×10-5Pa
Jig Unit Rotary shaft of the type of the planetary gear
Vacuum Unit Low Vacuum Pump + High Vacuum Pump +  Polycold
Vacuum Controller Vacuum Controller, Penning Gauge, Pirani Gauge
Coating Unit DC or MF Magnetron Sputtering Source + Plasma Source + Thermal Source
Charge Unit MFC
Thickness Controller Crystal Control
Controller PLC+TP
Application AF, Hard coating, Decorative coating, HR coating, etc.
Remark: Customization
  • Know More Technology ?

    More
  • Need More Equipment ?

    More
  • Industry Solutions ?

    More
Would you like to know more?
Please contact us

E-mail: info@hcvac.com

Online Consultation

Submit
We use cookies
We use cookies and other tracking technologies to improve your browsing experience on our website to show you personalized content and targeted ads, to analyze our website traffic, and to understand where our visitors are coming from. please consult our Cookie Policy.