Pvd coating machine has formed an indispensable part in people's daily life. It can be said that without vacuum coating machine and coating technology, daily life may be very boring and the quality of people's life will be greatly reduced. Our daily common coating machine application industries are divided into many types, such as: decorative vacuum coating machine, hard coating coating equipment, optical coating equipment, auto parts vacuum coating equipment, continuous line coating equipment, semiconductor coating equipment, etc. In the same way, the coating process is different, and the color and function of the coating are also very different. Pvd coating machines are ubiquitous in various industries, so what are the maintenance and precautions of pvd coating machines in the process of using pvd coating machines?

      Vacuum vacuum mainly includes several types of vacuum evaporation, sputtering and ion plating. They all deposit various metal and non-metal films on the surface of plastic parts by distillation or sputtering under vacuum conditions. In this way, a very thin surface coating can be obtained, and at the same time, it has high speed and good adhesion. Advantages, but the price is also high, there are fewer types of metals that can be operated, and it is generally used as a functional coating for higher-end products, such as internal shielding. There are two common electroplating processes for plastic products: water electroplating and vacuum ion plating.
       Vacuum ion plating, also known as vacuum coating. The practice of vacuum plating is now a relatively popular practice, and the products made have a strong sense of metal and high brightness. Compared with other coating methods, the cost is low and the pollution to the environment is small, and it is now widely used in various industries.
       When repairing the pvd coating machine, we should pay attention to the following problems:
       1. To install the vacuum electroplating equipment correctly, the vacuum chamber, electric control cabinet, etc. must be grounded safely.
       2. In order to ensure the quality of the coating, vacuum plating must first pay attention to the hygiene of the vacuum chamber, which must be strictly implemented according to the technical requirements. The parts in the chamber should be cleaned with gasoline or alcohol, and dried by vacuum plating before loading.
       3. Before starting the vacuum coating, check whether the mechanical rotating parts of each vacuum pump are normal, such as the seal in the transitional transmission of the rotary vane pump and the Roots pump. The vacuum coating must always check the oil and grease to ensure normal work.
       4. Start the compressor by vacuum coating. The air pressure of vacuum coating should be guaranteed to be above 0.4Mpa, and the water in the air storage tank of the compressor should be discharged frequently.
       5. After the vacuum coating work is completed, the vacuum electroplating chamber should be wiped clean, free of dirt, and maintain a low vacuum to avoid contaminating the vacuum system and affecting the vacuum performance.
       6. Always check the high-voltage micro-switch for the coating of the pvd coating machine, which should be safe and reliable. If the conduction is poor or damaged, it must be replaced immediately.